Early Streamer Emission(ESE) for Lightning Protection System

Decorative lightning rod is also called decorative lightning tower.

Suitable for installation on the top of landmark buildings, major office buildings. Beautiful and generous, novel and unique, durable and good decorative effect. It can increase the beauty of the appearance of the stationing point and enhance the overall image of the building.

Our company can produce different shapes, different heights and different weights of decorative lightning rods (towers) according to customer requirements or according to the appearance of the building design.

Lightning rods, also known as lightning protection rods and splice rods, are devices used to protect buildings, tall trees etc. from lightning strikes. A flash catcher is installed at the top of the protected object and connected to the buried drainage ground network with a conductor that meets the specifications. Lightning rod specifications must comply with national standards, and each lightning protection category requires a different height specification for the lightning rod. [1]
When a thundercloud discharge approaches the ground it distorts the ground electric field. At the top of the lightning rod, the formation of local electric field concentration space to influence the development of lightning pilot discharge direction, guide the lightning discharge to the lightning rod, and then through the grounding lead wire and grounding device will be lightning current into the earth, so that the protected object from lightning strikes.